KOLAR MAX TRAP
State-of-the-art Kolar Max Trap shotguns are available in many configurations for any type of trapshooter. With dynamic feel and pointability, maximun pattern efficiency and maximun strength for a lifetime of use, you be sure your Kolar Max Trap shotgun performs to help you reach your goals.
Carl Chadwell / Team Kolar Prostaff
T/A max Trap adjustable
Features either a 34” un-single, 34” over-single or a 30” or 32” over-under with fully adjustable ribs on all barrels.
max trap low profile
Features a low profile adjustable and fixed rib available with either 34” over-single, 32” or 30” over-under in 80% or 100% fixed POI.
t/s max trap single
Features an adjustable single ribbed 34” barrel of mid placement design for superb pointability and minimal recoil.
Max Trap T/A
Max Trap T/A High Profile – Over/Under – Standard
Max Trap T/A High Profile – Unsingle – Standard
Max Trap T/A High Profile – Over Single – Standard
Precisely Set P.O.I.
The Kolar Max Trap T/A is available with either 34” un-single, 34” over-single or a 30” or 32” over-under. It features fully adjustable ribs on all barrels. With the addition of the new standard low-profile (LP) rib, the Max Series TA combo now offers a range of Point Of Impact (P.O.I.) capability from 60% to 150%.
All combos are delivered with the barrels set to the same P.O.I. unless otherwise specified.
Maximum Pattern Efficiency
The barrels on the Kolar Max Trap T/A are the new light contour .740 bore, with extra-long forcing cones and factory CTs for maximum pattern efficiency.
A weight kit is available to meet your specific balance requirements when choosing the over-single barrel.
Unobstructed Target Acquisition
Stocks are designed to promote a heads-up gun mount, which promotes rapid unobstructed target acquisition. All stocks are fitted with a six-way adjustable comb. The forend is an extended beavertail design. Both stock and forend are cut from high-quality English walnut.
All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.
| GAUGE: | 12GA. | CHAMBERED 2.75” |
| FINISH: | RECEIVER/IRON BARRELS | SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL |
| BARRELS: | 30″ AND 32″ O/U, 32″ SINGLE BARREL ONLY. AVAILABLE IN LOW PROFILE ADJUSTABLE RIB 34” AVAILABLE T/A HIGH TOP SINGLE WITH ADJUSTABLE RIB, T/A HIGH UNSINGLE WITH ADJUSTABLE RIB, LOW PROFILE FIXED RIB TOP SINGLE IN 80% OR 100% FIXED POI. | .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE |
| RIBS: | RAMP TAPER | VENTED W/ADJUSTABLE P.O.I. |
| TRIGGER: | PULL OR FACTORY RELEASE | ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL. |
| STOCK & FOREND: | ENGLISH WALNUT W/BEAVERTAIL FOREND. | ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB. |
Max TrapT/A High, Unsingle – Adjustable rib
|
|||
| HIGH: | 60%-100% P.O.I. | ||
| EXTRA HIGH: | 100%-150% P.O.I. | ||
Max Trap T/A High, Top single – Adjustable rib
|
|||
| HIGH: | 70%-100% P.O.I. | ||
| EXTRA HIGH: | 100%-140% P.O.I. | ||
Max Trap T/A High, O/U – Adjustable rib
|
|||
| HIGH: | 65%-100% P.O.I. | ||
| EXTRA HIGH: | 100%-150% P.O.I. | ||
Max Trap T/A Low, Unsingle – Adjustable Rib |
|||
| LOW PROFILE: | 60%-90% P.O.I. | ||
Max Trap Low, Top Single, O/U – Fixed Rib |
|||
| LOW PROFILE: | 80% or 100% P.O.I. | ||
| COIL SPRING DRIVEN TRIGGER |  |
| SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE) |  |
Max Trap Low Profile
Max Trap Low Profile – Over Single
Fixed Point of Impact (80% or 100% available) – Standard
Max Trap Low Profile – Over/Under
Fixed Point of Impact (80% or 100% available) – Standard
Max Trap T/A Low Profile – Over/Under – Adjustable – Standard
Max Trap T/A Low Profile – Unsingle – Adjustable – Standard
Precisely Set P.O.I.
The new Kolar Max Trap Low Profile adjustable or fixed rib is available with either 34” over-single, 32” or 30” over-under in 80% or 100% fixed point of impact.
All combos are delivered with the barrels set to the same P.O.I. unless otherwise specified.
Maximum Pattern Efficiency
The barrels on the Kolar Max Trap Low Profile are the new light contour .740 bore, with extra-long forcing cones and factory CTs for maximum pattern efficiency.
A weight kit is available to meet your specific balance requirements when choosing the over-single barrel.
Unobstructed Target Acquisition
Stocks are designed to promote a heads-up gun mount, which promotes rapid unobstructed target acquisition. All stocks are fitted with a six-way adjustable comb. The forend is an extended beavertail design. Both stock and forend are cut from high-quality English walnut.
All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.
| GAUGE: | 12GA. | CHAMBERED 2.75” |
| FINISH: | RECEIVER/IRON BARRELS | SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL |
| BARRELS: | AVAILABLE WITH EITHER 34” OVER SINGLE, 32” or 30” O/U IN 80% OR 100% FIXED POINT OF IMPACT. | .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE |
| RIBS: | RAMP TAPER | VENTED |
| TRIGGER: | PULL OR FACTORY RELEASE | ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL. |
| STOCK & FOREND: | ENGLISH WALNUT W/BEAVERTAIL FOREND. | ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB. |
Max Trap T/S
Max Trap T/S – Standard
Maximum Strength for a Lifetime of Use
Receiver and forend iron are CNC machined from a solid bar of 4140 chrome-moly steel to withstand the rigors of a lifetime of use. The receiver, with its full hinge pin and a massive locking bolt, serve to balance the gun and contribute to its extremely soft recoil characteristics. A unique ejector system allows for ejection of spent shells, or it can be adjusted to lift only.
Absolute Tolerances & Perfect Balance
The trigger housing and mechanism are also CNC machined to afford absolute tolerances. The hammer and sears are precision EDM wired from hardened tool steel to maintain crisp, consistent trigger feel. Trigger weight is set at a nominal 3.5 lbs. An optional factory release trigger is also available.
Superb Pointability & Minimal Recoil
The Kolar Max Trap T/S features an adjustable ribbed 34” barrel of mid placement design for superb pointability and minimal recoil. The barrel is available in a .740 lite contour.
Precise & Consistent Point of Impact
Point-of-impact is perfected with a rib hinged at the breech and muzzle. This ensures precise, consistent Point Of Impact (P.O.I.). in all conditions. Ribs are of a ramp taper design and are available to allow for P.O.I. of 60% to 120%.
Handcrafted Details
Stocks and forends on all Kolar Max Trap T/S guns are cut from English walnut and are available in right or left-hand configurations. Both are fitted with an adjustable comb and the forend is a beavertail design. The Kolar Max Trap T/S is available in standard grade with engraved configurations to follow.
All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.
| GAUGE: | 12GA. | CHAMBERED 2.75” |
| FINISH: | RECEIVER/IRON BARRELS | SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL |
| BARRELS: | 34”L | .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE |
| RIBS: | RAMP TAPER | VENTED W/ADJUSTABLE P.O.I. |
| TRIGGER: | PULL OR FACTORY RELEASE | ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL. |
| STOCK & FOREND: | ENGLISH WALNUT W/ |
ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB. |
Max Trap TS / Adjustable Rib |
|||
| STANDARD: | 60%-90% P.O.I. | ||
| HIGH: | 70%-100% P.O.I. | ||
| EXTRA HIGH: | 90%-120% P.O.I. | ||
| FULLY ADJUSTABLE RIB (STANDARD FEATURE) |  |
| A OR B HANGER |  |
| COIL SPRING DRIVEN TRIGGER | |
| SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE) | |
Kolar Arms Corporate Office
1925 Roosevelt Avenue
Racine, WI 53406
Ph: (262) 554-0800
Fax: (262) 554-9093
FOLLOW US
Stay up-to-date with news and events in the shooting industry!